Control the MA Network Switch from a grandMA2¶

The MA Network Switch is the perfect device for a full lighting control solution. The combination of console, switch and networking devices provides the easiest solution even for complex lighting systems.

You can control the MA Network Switch by using the web interface or directly with a grandMA2 console or grandMA2 onPC. For more information about how to control the MA Network Switch by using the web interface see MA Network Switch manual.

This chapter explains how to control the MA Network Switch from a grandMA2 console or grandMA2 onPC. You will find out how to add the MA Network Switch to the network configuration, configure ports, or edit groups and presets.

In this chapter¶

• Add MA Network Switch
• Change IP address
• Enable DHCP client
• Change hostname
• Change switch ID
• Configure ports
• Edit groups
• Edit presets
• Edit LAGs
• Mirror ports
• Work with the switch configuration
• Disable SNMP
• Change password
• Update firmware
• Reset to factory defaults
• Delete MA Network Switch

Source: key_control_ma_switch.html (grandMA2 manual v3.9)