Skip to content

Connect grandMA2 fader wing

To extend the console by 15 motorized faders and 15 executor buttons, connect a grandMA2 fader wing.

Hint

You can connect up to four grandMA2 fader wings to one grandMA2 console.

  1. Connect one end of a 15 pin D-Sub cable to the MA-LINK connector on the rear panel.
  2. Connect the other end to the grandMA2 fader wing.

The grandMA2 fader wing is connected to the console.

grandMA2 full-size MA-LINK connector

To configure the wings see wing & monitor setup.

Source: key_fs_connect_grandma2_fader_wing.html (grandMA2 manual v3.9)