Connect Sound¶
Explained in (1)
- Working practice: Playing in time: the clock, the tempo, the grid
To use a sound trigger, BPM or sound as an effect form, connect a sound source to the console.
Important
Information:
The signal strength should be a minimum of 20 millivolts.
Pin 1: Ground
Pin 2 and Pin 3: Balanced Input
- Connect the 3 pin XLR sound source cable to the Audio IN connector on the rear panel.
The sound source is connected to the Audio IN connector.
grandMA2 full-size Audio IN connector
For more information see adjust sound input and create effect form.
Source: key_fs_connect_sound.html (grandMA2 manual v3.9)